Texas A&M University Industrial Engineering
    Transfer Acceptance Rate and Requirements

    Texas A&M College of Engineering transfer acceptance rate, fall 2025: 26%

    The College of Engineering admitted 309 of 1,191 transfer applicants for fall 2025. The rate covers the whole college, which includes Industrial Engineering.

    Transfermatic has a class-by-class Texas A&M Industrial Engineering plan ready for you. Access now

    Texas A&M University's transfer course sheet for Industrial Engineering asks for at least a 3.5 transfer GPA and 24 transferable hours.

    The guide sets a maximum of 60 transferable hours at the time you apply.

    It lists 4 requirements for admission: MATH 2413; MATH 2414; CHEM 1409 or CHEM 1412 (with the guide's condition quoted on this page); and PHYS 2425 or PHYS 2325.

    Texas A&M's guide lists Industrial Engineering as not eligible as a second-choice major.

    Texas A&M's guide says admission is not guaranteed.

    This guide is for students applying between August 1, 2026 and October 15, 2027.

    26%
    College of Engineering transfer acceptance rate, fall 2025
    3.5
    Minimum transfer GPA in the guide
    24
    Transferable hours before applying
    60
    Most transferable hours at application

    From Texas A&M's 2026-27 transfer course sheet · Checked November 15, 2026 · admissions.tamu.edu

    Acceptance rate sources: Texas A&M Academic and Business Performance Analytics: Applied Admitted Enrolled (Power BI dashboard)

    Rules from Texas A&M's guide

    • Admission

      “Summer coursework will not be considered for summer/fall applicants.”
    • Admission

      “Fall coursework will not be considered for spring applicants.”
    • Admission

      “Applicants to the spring term should have the required coursework completed by the end of Summer II semester before applying.”
    • Admission

      “The strongest applicants will have completed the required calculus sequence, two sciences, and a programming course in either C, C++, Java, or Python.”
    • Admission

      “Transfer applicants are instructed NOT to accept transfer admission to any major with the expectation of later applying for an on-campus change of major.”
    • Program

      “Students should indicate our department as the primary major they are interested in if they wish to be admitted.”
    • Grades

      “Courses listed should be completed with a grade of B or better.”
    • GPA

      “All math coursework must have a 3.5 GPA. This GPA will be calculated using ALL attempted math courses, including repeated courses.”
    • Other

      “College Algebra, Trigonometry and Pre-Calculus are transferable courses but will not satisfy the Mathematics requirements in this degree plan.”
    • Other

      “Transfer applicants admitted to Texas A&M Engineering with credit for PHYS 2425 (2325/2125) and PHYS 2426 (2326/2126) will only receive 6 credit hours towards their Engineering bachelor’s degree if entering AFTER Spring 2018.”
    • Transfer credit

      “Credit by Examination courses will not count towards the 24 hours required for consideration for admission.”
    • Transfer credit

      “Transfer applicants should have completed at least 2 full semester course loads of a total of 24 transferable hours (minimum) after graduating from high school.”
    • Other

      “Transfer students should plan on taking the appropriate ENGR coursework for ENGR 102/216/217 at Texas A&M University.”

    Quoted from Texas A&M's 2026-27 transfer course sheet.

    Classes to take before you transfer to Texas A&M

    The courses Texas A&M's 2026-27 transfer course sheet lists for Industrial Engineering, by Texas common course number. Where the guide names Texas A&M's own course, it is shown under the slot.

    Required for admission

    Texas A&M's guide marks these as required for admission.

    Required Coursework for Admission

    Engineering Math I

    • MATH 2413

    4 hours · B or better · Texas A&M course MATH 151

    Engineering Math II

    • MATH 2414

    4 hours · B or better · Texas A&M course MATH 152

    Chemistry for Engineering

    Take one of these:

    • CHEM 1409
    • CHEM 1412

    “Prospective students attending an institution without an equivalent to CHEM 107/117 can transfer an equivalent to Fundamentals of Chemistry II (CHEM 120 – CHEM 1412) to fulfill the CHEM 107/117 requirement.”

    4 hours · B or better · Texas A&M course CHEM 107/117 or CHEM 120

    Newtonian Mechanics for Engineering and Science

    Take one of these:

    • PHYS 2425
    • PHYS 2325

    3 hours · B or better · Texas A&M course PHYS 206 or 218

    First Year

    A term-by-term schedule from Texas A&M's guide. The guide does not mark these as needed for admission.

    Take one of these:

    • ENGL 1301
    • ENGL 1302

    3 hours · Texas A&M course ENGL 103 or 104

    American History

    3 hours

    Government/Political Science

    • GOVT 2305

    3 hours · Texas A&M course POLS 206

    Government/Political Science

    • GOVT 2306

    3 hours · Texas A&M course POLS 207

    Second Year

    A term-by-term schedule from Texas A&M's guide. The guide does not mark these as needed for admission.

    Calculus III

    • MATH 2415

    3 hours · Texas A&M course MATH 251/253

    Electricity and Magnetism for Engineering and Science

    Take one of these:

    • PHYS 2426
    • PHYS 2326

    3 hours · Texas A&M course PHYS 207

    You may take the four-credit version of PHYS but only three credits will be applied

    We have your term-by-term class schedule for transferring to Texas A&M Industrial Engineering.

    Build my plan

    Takes 1 minute

    What Texas A&M's guide says

    • “Meeting minimum requirements does not guarantee admission. The entire record is reviewed for consistency in coursework and grades.”
    • “Admission preference is given to applicants with the highest GPA and the most appropriate courses completed; this is not a guarantee of admission.”

    Quoted from Texas A&M's 2026-27 transfer course sheet. admissions.tamu.edu

    Frequently asked questions

    What is the Texas A&M University Industrial Engineering transfer acceptance rate?

    26% for the College of Engineering, which includes Industrial Engineering: Texas A&M's admissions data counts transfer applicants by college, and for fall 2025 the College of Engineering admitted 309 of 1,191. Across the whole university, Texas A&M admitted 3,417 of 6,622 transfer applicants for fall 2025 (52%).

    What GPA do you need to transfer to Texas A&M for Industrial Engineering?

    Texas A&M's 2026-27 transfer course sheet for Industrial Engineering asks for at least a 3.5 transfer GPA. It also says admission is not guaranteed.

    What classes do I need to transfer to Texas A&M for Industrial Engineering?

    Texas A&M marks these as required for admission to Industrial Engineering: MATH 2413; MATH 2414; CHEM 1409 or CHEM 1412 (with the guide's condition quoted on this page); and PHYS 2425 or PHYS 2325. The list uses Texas common course numbers, so you can look each one up in your community college's catalog.

    How many hours do I need to transfer to Texas A&M for Industrial Engineering?

    Texas A&M's guide for Industrial Engineering asks for at least 24 transferable hours before you apply. The guide sets a maximum of 60 transferable hours at the time you apply.

    When can I apply to transfer to Texas A&M for Industrial Engineering?

    This guide is for students applying between August 1, 2026 and October 15, 2027.

    Which slots in Texas A&M's Industrial Engineering guide can any core curriculum course fill?

    The guide names one Texas Core Curriculum area instead of a course: American History. There, the guide asks for a course from your college's core list for that area.

    Is admission to Texas A&M Industrial Engineering guaranteed?

    No. Texas A&M's guide for Industrial Engineering says admission is not guaranteed.

    Texas Core Curriculum lists by community college

    The guide lets any course on your college's Texas Core Curriculum list fill its American History slot. Each college below links to its own list.

    Industrial Engineering at other Texas universities

    All Texas A&M University majorsTransferring in Texas: Fields of Study

    Get your class-by-class plan to Texas A&M Industrial Engineering.

    Build my plan

    Takes 1 minute