Texas A&M University Electrical Engineering
    Transfer Acceptance Rate and Requirements

    Texas A&M College of Engineering transfer acceptance rate, fall 2025: 26%

    The College of Engineering admitted 309 of 1,191 transfer applicants for fall 2025. The rate covers the whole college, which includes Electrical Engineering.

    Transfermatic has a class-by-class Texas A&M Electrical Engineering plan ready for you. Access now

    Texas A&M University's transfer course sheet for Electrical Engineering asks for at least a 3.5 transfer GPA and 24 transferable hours.

    The guide sets a maximum of 64 transferable hours at the time you apply.

    It lists 6 requirements for admission: MATH 2413; MATH 2414; PHYS 2425 or PHYS 2325; PHYS 2426 or PHYS 2326; and more on this page.

    Texas A&M's guide lists Electrical Engineering as not eligible as a second-choice major.

    Texas A&M's guide says admission is not guaranteed.

    This guide is for students applying between August 1, 2026 and October 15, 2027.

    26%
    College of Engineering transfer acceptance rate, fall 2025
    3.5
    Minimum transfer GPA in the guide
    24
    Transferable hours before applying
    64
    Most transferable hours at application

    From Texas A&M's 2026-27 transfer course sheet · Checked November 15, 2026 · admissions.tamu.edu

    Acceptance rate sources: Texas A&M Academic and Business Performance Analytics: Applied Admitted Enrolled (Power BI dashboard)

    Rules from Texas A&M's guide

    • Admission

      “Students should indicate our department as the primary major they are interested in if they wish to be admitted.”
    • Admission

      “Transfer applicants are instructed NOT to accept transfer admission to any major with the expectation of later applying for an on-campus change of major.”
    • Program

      “ENGR/PHYS 216 & 217 are required to be completed at TAMU.”
    • Program

      “Applicants should be aware that time to graduation may still require 2 or more years from the initial semester at Texas A&M University”
    • Grades

      “Courses listed above are required to be completed with a grade of B or better.”
    • Other

      “Transfer applicants admitted to Texas A&M Engineering with credit for PHYS 2425 (2325/2125) and PHYS 2426 (2326/2126) will only receive 6 credit hours towards their Engineering bachelor’s degree.”
    • Other

      “Trigonometry and Pre-Calculus are transferable courses but will not satisfy the Mathematics requirements in this degree plan.”
    • Other

      “College Algebra is a transferable course, but will not satisfy the Mathematics requirements in this degree plan.”
    • Transfer credit

      “Credit by Examination courses will not count towards the 24 hours required for consideration for admission.”
    • Transfer credit

      “Transfer applicants should have completed at least 2 full semester course loads of a total of 24 transferable hours (minimum) after graduating from high school.”
    • Conditions

      “Summer coursework will not be considered for summer/fall applicants.”
    • Conditions

      “Fall coursework will not be considered for spring applicants.”
    • Conditions

      “Applicants to the spring term should have the recommended coursework completed by the end of Summer II semester before applying.”

    Quoted from Texas A&M's 2026-27 transfer course sheet.

    Classes to take before you transfer to Texas A&M

    The courses Texas A&M's 2026-27 transfer course sheet lists for Electrical Engineering, by Texas common course number. Where the guide names Texas A&M's own course, it is shown under the slot.

    Required for admission

    Texas A&M's guide marks these as required for admission.

    Required Coursework for Admission

    Engineering Math I

    • MATH 2413

    4 hours · B or better · Texas A&M course MATH 151

    Engineering Math II

    • MATH 2414

    4 hours · B or better · Texas A&M course MATH 152

    Physics for Engineers I

    • PHYS 2425 or PHYS 2325

    3 hours · B or better · Texas A&M course PHYS 206

    You may take the four-credit version of PHYS but only three credits will be applied.

    Physics for Engineers II

    • PHYS 2426 or PHYS 2326

    3 hours · B or better · Texas A&M course PHYS 207

    You may take the four-credit version of PHYS but only three credits will be applied.

    Chemistry for Engineering

    Take one of these:

    • CHEM 1409
    • CHEM 1412

    4 hours · B or better · Texas A&M course CHEM 107/117 or CHEM 120

    Students attending an institution without an equivalent to CHEM 107/117 can transfer an equivalent to Fundamentals to Chemistry II (CHEM 120 – CHEM 1412) to fulfill the CHEM 107/117 requirement.

    Composition and Rhetoric

    Take one of these:

    • ENGL 1301
    • ENGL 1302

    3 hours · B or better · Texas A&M course ENGL 103 or 104

    Either ENGL 1301 or ENGL 1302 will fulfill three of the six required credit hours of Communication requirements.

    First Year

    A term-by-term schedule from Texas A&M's guide. The guide does not mark these as needed for admission.

    American History

    Chemistry I or Chemistry for Engineering

    Take one of these:

    • CHEM 1411 or (CHEM 1311 + CHEM 1111)
    • CHEM 1409

    4 hours

    Students that take CHEM 107/117 (CHEM 1409) do not need to take CHEM 119 and CHEM 120.

    Chemistry II

    • CHEM 1412 or (CHEM 1312 + CHEM 1112)

    4 hours · Texas A&M course CHEM 120

    Second Year

    A term-by-term schedule from Texas A&M's guide. The guide does not mark these as needed for admission.

    Engineering Math III

    • MATH 2415

    3 hours · Texas A&M course MATH 253

    MATH 253 is an acceptable substitution for MATH 251. It is recommended that applicants complete the calculus sequence to fulfill the MATH 151, 152, and 251 degree requirements.

    Differential Equations

    • “MATH 308 Differential Equations”

    3 hours · Texas A&M course MATH 308

    Communication Elective

    Take one of these:

    • ENGL 2311
    • SPCH 2335

    3 hours

    Creative Arts

    3 hours

    Social and Behavioral Science

    3 hours

    American Government

    • GOVT 2305

    3 hours · Texas A&M course POLS 206

    State & Local Government

    • GOVT 2306

    3 hours · Texas A&M course POLS 207

    We have your term-by-term class schedule for transferring to Texas A&M Electrical Engineering.

    Build my plan

    Takes 1 minute

    What Texas A&M's guide says

    • “Students may have to complete Trigonometry and Pre-Calculus (MATH 2412) at their institution before taking MATH 2413.”
    • “Competitive applicants will have the required coursework completed by the application deadline.”
    • “Meeting minimum requirements does not guarantee admission. The entire record is reviewed for consistency in coursework and grades.”
    • “Students are encouraged to complete or in progress of completing a computer programming course. Any language is acceptable: however, (in order of preference) Python, Matlab, and C++ are the preferred languages.”

    Quoted from Texas A&M's 2026-27 transfer course sheet. admissions.tamu.edu

    Frequently asked questions

    What is the Texas A&M University Electrical Engineering transfer acceptance rate?

    26% for the College of Engineering, which includes Electrical Engineering: Texas A&M's admissions data counts transfer applicants by college, and for fall 2025 the College of Engineering admitted 309 of 1,191. Across the whole university, Texas A&M admitted 3,417 of 6,622 transfer applicants for fall 2025 (52%).

    What GPA do you need to transfer to Texas A&M for Electrical Engineering?

    Texas A&M's 2026-27 transfer course sheet for Electrical Engineering asks for at least a 3.5 transfer GPA. It also says admission is not guaranteed.

    What classes do I need to transfer to Texas A&M for Electrical Engineering?

    Texas A&M marks these as required for admission to Electrical Engineering: MATH 2413; MATH 2414; PHYS 2425 or PHYS 2325; PHYS 2426 or PHYS 2326; CHEM 1409 or CHEM 1412; and ENGL 1301 or ENGL 1302. The list uses Texas common course numbers, so you can look each one up in your community college's catalog.

    How many hours do I need to transfer to Texas A&M for Electrical Engineering?

    Texas A&M's guide for Electrical Engineering asks for at least 24 transferable hours before you apply. The guide sets a maximum of 64 transferable hours at the time you apply.

    When can I apply to transfer to Texas A&M for Electrical Engineering?

    This guide is for students applying between August 1, 2026 and October 15, 2027.

    Which slots in Texas A&M's Electrical Engineering guide can any core curriculum course fill?

    The guide names 3 Texas Core Curriculum areas instead of a course: Creative Arts, American History and Social and Behavioral Sciences. There, the guide asks for a course from your college's core list for that area.

    Is admission to Texas A&M Electrical Engineering guaranteed?

    No. Texas A&M's guide for Electrical Engineering says admission is not guaranteed.

    Texas Core Curriculum lists by community college

    The guide lets any course on your college's Texas Core Curriculum list fill its Creative Arts, American History and Social and Behavioral Sciences slots. Each college below links to its own list.

    Electrical Engineering at other Texas universities

    All Texas A&M University majorsTransferring in Texas: Fields of Study

    Get your class-by-class plan to Texas A&M Electrical Engineering.

    Build my plan

    Takes 1 minute