Texas A&M University Civil Engineering (B.S.)
    Transfer Acceptance Rate and Requirements

    Texas A&M College of Engineering transfer acceptance rate, fall 2025: 26%

    The College of Engineering admitted 309 of 1,191 transfer applicants for fall 2025. The rate covers the whole college, which includes Civil Engineering (B.S.).

    Transfermatic has a class-by-class Texas A&M Civil Engineering plan ready for you. Access now

    Texas A&M University's transfer course sheet for Civil Engineering (B.S.) asks for at least a 3.5 transfer GPA and 24 transferable hours.

    The guide sets a maximum of 64 transferable hours at the time you apply.

    It lists 5 requirements for admission: MATH 2413; MATH 2414; CHEM 1409 or CHEM 1412; PHYS 2425 or PHYS 2325; and more on this page.

    Texas A&M's guide lists Civil Engineering (B.S.) as not eligible as a second-choice major.

    Texas A&M's guide says admission is not guaranteed.

    This guide is for students applying between August 1, 2026 and October 15, 2027.

    26%
    College of Engineering transfer acceptance rate, fall 2025
    3.5
    Minimum transfer GPA in the guide
    24
    Transferable hours before applying
    64
    Most transferable hours at application

    From Texas A&M's 2026-27 transfer course sheet · Checked November 15, 2026 · admissions.tamu.edu

    Acceptance rate sources: Texas A&M Academic and Business Performance Analytics: Applied Admitted Enrolled (Power BI dashboard)

    Rules from Texas A&M's guide

    • Admission

      “The department will not admit students who do not indicate our department as the primary major.”
    • Admission

      “Admission preference is given to applicants who are not already enrolled in a degree-granting civil engineering program at another institution.”
    • Grades

      “Applicants should complete the courses listed with a grade of B or better before submitting the transfer application.”
    • Grades

      “Applicants must earn a B or better in all math, science, and engineering courses taken subsequent to the required coursework”
    • Transfer credit

      “Admission preference is also given to applications who have fewer than 60 transferable credit hours.”
    • Conditions

      “The Zachry Department of Civil & Environmental Engineering makes admission decisions based upon final grades in required coursework and does NOT hold applications to wait for grades.”
    • Transfer credit

      “Transfer applicants should have completed at least 2 full semester course loads of a total of 24 transferable hours (minimum) after graduating from high school.”
    • Transfer credit

      “Credit by Examination courses will not count towards the 24 hours required for consideration for admission.”
    • Conditions

      “Summer coursework will not be considered for summer/fall applicants.”
    • Conditions

      “Fall coursework will not be considered for spring applicants.”
    • Conditions

      “Applicants to the spring term shall have the required coursework completed for a final grade by the end of Summer II semester before applying.”
    • Other

      “Transfer applicants admitted to Texas A&M Engineering with credit for PHYS 2425 (2325/2125) and PHYS 2426 (2326/2126) may only receive 6 credit hours towards their Engineering bachelor’s degree.”
    • Other

      “College Algebra, Trigonometry and Pre-Calculus are courses that transfer, but will not satisfy the Mathematics requirements in this degree plan.”

    Quoted from Texas A&M's 2026-27 transfer course sheet.

    Classes to take before you transfer to Texas A&M

    The courses Texas A&M's 2026-27 transfer course sheet lists for Civil Engineering (B.S.), by Texas common course number. Where the guide names Texas A&M's own course, it is shown under the slot.

    Required for admission

    Texas A&M's guide marks these as required for admission.

    Required Coursework for Admission

    Engineering Mathematics I

    • MATH 2413

    4 hours · B or better · Texas A&M course MATH 151

    Engineering Mathematics II

    • MATH 2414

    4 hours · B or better · Texas A&M course MATH 152

    Chemistry for Engineers and Lab

    Take one of these:

    • CHEM 1409
    • CHEM 1412

    4 hours · B or better · Texas A&M course CHEM 107/117 or CHEM 120

    Prospective students attending an institution without an equivalent to CHEM 107/117 can transfer an equivalent to Fundamentals of Chemistry II (CHEM 120 – CHEM 1412) to fulfill the CHEM 107/117 requirement.

    Physics for Engineers I

    • PHYS 2425 or PHYS 2325

    3 hours · B or better · Texas A&M course PHYS 206

    You may take the four-credit version of PHYS but only three credits will apply.

    Composition and Rhetoric

    • ENGL 1301

    3 hours · B or better · Texas A&M course ENGL 103

    ENGL 1301 may substitute for ENGL 1302, but the department will only apply credit for one of these two classes to the degree plan.

    First Year

    A term-by-term schedule from Texas A&M's guide. The guide does not mark these as needed for admission.

    Fundamentals of Chemistry I or General Chemistry for Engineering Students

    Take one of these:

    • CHEM 1411 or (CHEM 1311 + CHEM 1111)
    • CHEM 1409

    4 hours

    Fundamentals of Chemistry II

    • CHEM 1412 or (CHEM 1312 + CHEM 1112)

    4 hours · Texas A&M course CHEM 120

    Students who take CHEM 107/117 (CHEM 1410) do not need to take CHEM 119 and CHEM 120.

    University Core Curriculum

    • The guide names no specific course for this slot.

    Second Year

    A term-by-term schedule from Texas A&M's guide. The guide does not mark these as needed for admission.

    Technical and Business Writing

    • ENGL 2311

    3 hours · Texas A&M course ENGL 210

    Engineering Mathematics III

    • MATH 2415

    Physics for Engineers II

    • PHYS 2426 or PHYS 2326

    3 hours · Texas A&M course PHYS 207

    You may take the four-credit version of PHYS but only three credits will apply.

    Differential Equations

    • MATH 2320

    3 hours · Texas A&M course MATH 308

    University Core Curriculum

    • The guide names no specific course for this slot.

    12 hours

    We have your term-by-term class schedule for transferring to Texas A&M Civil Engineering.

    Build my plan

    Takes 1 minute

    What Texas A&M's guide says

    • “Students may have to complete Trigonometry and Pre-Calculus (MATH 2412) at their institution before taking MATH 2413.”
    • “Competitive applicants will have the required coursework completed with a final grade by the application deadline.”
    • “Meeting minimum requirements does not guarantee admission. The entire record is reviewed for consistency in coursework and grades. Admission is for a finite number of places based upon competition among applicants meeting minimum requirements.”
    • “Students are strongly encouraged to complete a computer programming course prior to transferring. Python is the recommended language; Matlab and C++ are also acceptable.”

    Quoted from Texas A&M's 2026-27 transfer course sheet. admissions.tamu.edu

    Frequently asked questions

    What is the Texas A&M University Civil Engineering (B.S.) transfer acceptance rate?

    26% for the College of Engineering, which includes Civil Engineering (B.S.): Texas A&M's admissions data counts transfer applicants by college, and for fall 2025 the College of Engineering admitted 309 of 1,191. Across the whole university, Texas A&M admitted 3,417 of 6,622 transfer applicants for fall 2025 (52%).

    What GPA do you need to transfer to Texas A&M for Civil Engineering (B.S.)?

    Texas A&M's 2026-27 transfer course sheet for Civil Engineering (B.S.) asks for at least a 3.5 transfer GPA. It also says admission is not guaranteed.

    What classes do I need to transfer to Texas A&M for Civil Engineering (B.S.)?

    Texas A&M marks these as required for admission to Civil Engineering (B.S.): MATH 2413; MATH 2414; CHEM 1409 or CHEM 1412; PHYS 2425 or PHYS 2325; and ENGL 1301. The list uses Texas common course numbers, so you can look each one up in your community college's catalog.

    How many hours do I need to transfer to Texas A&M for Civil Engineering (B.S.)?

    Texas A&M's guide for Civil Engineering (B.S.) asks for at least 24 transferable hours before you apply. The guide sets a maximum of 64 transferable hours at the time you apply.

    When can I apply to transfer to Texas A&M for Civil Engineering (B.S.)?

    This guide is for students applying between August 1, 2026 and October 15, 2027.

    Is admission to Texas A&M Civil Engineering (B.S.) guaranteed?

    No. Texas A&M's guide for Civil Engineering (B.S.) says admission is not guaranteed.

    Civil Engineering at other Texas universities

    All Texas A&M University majorsTransferring in Texas: Fields of Study

    Get your class-by-class plan to Texas A&M Civil Engineering.

    Build my plan

    Takes 1 minute