TransfermaticDANCETQ at East Los Angeles College

    DANCETQ 573 - Conditioning for Dance Team Techniques IV

    Recent Professors
    Not yet assigned
    Recent Semesters
    No scheduled sections on record
    Class Size
    Not published
    Credits
    1
    Prerequisite
    Dance Techniques 572.
    Transfers To
    CSUCSU GE Area E
    Description
    This pre-performance level dance course advances acquired techniques and knowledge of a complete con- ditioning for dance class with emphasis placed on the development of stylistic nuances and dynamic range for dancer performance. Artistic development of per- formance components and advancement in condition- ing techniques are applied to acquired skills learned in previous dance conditioning programs. Students apply knowledge of codified terminology, dancer technique and training, musical phrasing, and performance skills to exist- ing dance technique vocabulary for the purpose of stage performance preparation. Dancer marketing materi- als, including dance resume, bio and head shots are dis- cussed. Simulation of professional dance auditions further prepare students for real-life audition processes. Engineering and Technologies Department Engineering and Technologies Department E7-104 � (323) 265-8858 The Engineering and Technologies (E&T) Department at ELAC was established in 1945 and offers a comprehen- sive E&T program in the Los Angeles Community College District (LACCD). The department offers programs and courses in engineering transfer as well as Career Techni- cal Education (CTE) courses that are not only hands-on and designed to prepare students with lower division course requirements for transfer to a four-year engineer- ing program at a junior level, but also offers CTE pro- grams in high-demand, high-wage jobs that specialize in the modern technologies in applied sciences and career preparation. The learning is greatly enhanced by faculty interaction with students in hands-on projects, small class size, and continual guidance from faculty mentors, STEM counselors, and club advisors. In addition, all the engi- neering courses are transferable to either University of California or California State University systems depend- ing on the requirements of the four-year engineering school of their choice. Furthermore, the department's Engineering Club pro- vides several leadership opportunities to student mem- bers. The club is comprised of sub-organizations, includ- ing Geo-Huskies, Engineering Surveying Society, Civil and Environmental Engineering Student Organization, that cater to the needs of the various engineering and technol- ogy disciplines as well as the student body. In addition, the club serves the ELAC student body and its community via the five pillars of the Society of Hispanic Professional Engi- neers (SHPE) organization. Finally, the department is excited to announce that many more programs in engineering transfer and CTE are being developed to help make ELAC one of the top engineer- ing and technology departments in the State of Califor- nia. Currently, we have three state-approved programs in Engineering Technology, as well as an Associate Degree and various Certificate of Achievement Programs and Skills Certificates in Engineering Graphics and Design Technology (EGD), Geo-Spatial Engineering and Technol- ogies (GSET), and a program which includes all stages of the statewide Information Technologies Technician Path- way (IT). Faculty Ramirez, Jose C, Chair, Professor, Electrical Engineering & Technologies Davidian, Artin M., EIT, Associate Professor, Mechanical Engineering & Technologies Gallegos, Dr. Humberto A., PE, LSIT, Associate Professor, Civil Engineering and Technologies Khashayar, Kamyar, Professor, Mechanical Engineering & Manufacturing Villanueva, Eddie, Associate Professor, Electronics & Technologies Adjunct Associate Professors Alvarado, Edward, Engineering Laboratory Technician Castillo, Dr. Mauricio Choi, Sangbum Hernandez, Everardo Hernandez, Jose Hoggan, Randy Ibarra, Sandra Jacobson, Stanley Mesghali, Dr. Farid Montenegro, Celeste Munoz, Luis Ramirez, Oscar Rivera, Glenn Rodriguez, Juan Ruiz, Francisco Rullan, Michelle Swicegood, Mark Trejo, Juan Staff Alvarado, Edward, Engineering Laboratory Technician Educational Programs SUBJECTS � Electrical Engineering Technology � Electronics � Engineering Graphics & Design � Engineering Support � Engineering Technician � General Engineering � Industrial Technology � Manufacturing and Industrial Technology SKILLS CERTIFICATES � 3D Mapping for GIS Applications � 3D Modeling for Building Information Modeling (BIM) Application � A+ Certification Training � Engineering Graphics and Design � LabVIEW Certification � Land Surveying Technician Skills Certificate I � Land Surveying Technician Skills Certificate II � Land Surveying Technician for High School Students � Network + � Programming Certification � Programming and Problem Solving � Property Boundaries for Real Estate and Land Surveying � Rocketry Level 1 Certification � Sustaining Energy Certification Engineering and Technologies Department CERTIFICATES OF ACHIEVEMENT � Advanced Manufacturing Engineering Technician � Computer-Aided Drafting (CAD) � Geo-Spatial Engineering and Technologies � IT Technician Pathway: Stage 1 Computer Retail Sales and Support � IT Technician Pathway: Stage 2 Help Desk User Support � IT Technician Pathways: Stage 3 IT Technician ASSOCIATE DEGREE PROGRAMS � Engineering Graphics and Design Technology � Engineering Technology: Advanced Manufacturing � Geo-Spatial Engineering and Technologies � IT Technician Pathway Skills Certificates The Engineering and Technologies department encourages students seeking to earn any Skills Certificate to complete the requirements for their chosen Skills Certificate within the same academic year. 3D Mapping for GIS Applications This skills certificate program in 3D mapping for GIS appli- cations trains students to comprehend how 3D field mea- surements are used to create interactive maps to visual- ize and explore your data using Esri's dynamic mapping software. SUBJECT & NO. COURSE UNITS GEOG 025 Introduction to Geographic Information Systems and Laboratory. . . . . . . . . . . . . . . . . . . . . 4 OR GIS 025 Introduction to Geographic Information Systems and Laboratory. . . . . . . . . . . . . . . . . . . . . 4 ENG SUP 121* Plane Surveying I. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ENG SUP 221 Plane Surveying II. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 *This course has a prerequisite. 3D Modeling for Building Information Modeling (BIM) Application This skills certificate program in 3D modeling for building information modeling application trains students on how to extract 3D field measurements that are used to create a digital representation of physical structures. BIM is critical during the design, construction, and operation processes for Architecture Engineering Construction (AEC) projects. SUBJECT & NO. COURSE UNITS ARC 164 Design Software for Architecture. . . . . . . . . . . . . 2 ENG SUP 121* Plane Surveying I. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ENG SUP 221 Plane Surveying II. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ARC 165 Sustainable Design and Building Information Modeling. . . . . . . . . . . . . . . . . . . . . . . . . 2 Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 *This course has a prerequisite. A+ Certification Training The East Los Angeles College Electronics Department offers an "A+ Certification Training" program. Students who successfully pass the program requirements are eli- gible to take the A+ Certification examination. SUBJECT & NO. COURSE UNITS ELECTRN 121** Cisco Essentials: Part 1 CompTIAs A+ Hardware Certification. . . . . . . . . . . . . . . . . . . . . . . 3 ELECTRN 122** Cisco Essentials: Part 2 CompTIAs A+ Software Certification. . . . . . . . . . . . . . . . . . . . . . . . 3 ELECTRN 126** Installing, Configuring and Administering a Microsoft OS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 **This course has a corequisite. Engineering Graphics and Design The Engineering and Technologies Department offers an Engineering Graphics & Design Technology pro- gram leading to a skill certificate in Engineering Graph- ics and Design, which includes instruction in both 2-D and 3-D Computer Aided Drafting software courses. The skill set is achievable in one semester with the comple- tion of three courses (9 units). Many students take advan- tage of the value of this skill set by working in industry while continuing their education leading to a Certificate of Achievement. SUBJECT & NO. COURSE UNITS EGD TEK 102 Engineering Graphics with CAD and Introduction to GD&T. . . . . . . . . . . . . . . . . . . . . . . . . . 3 EGD TEK 111 2-D Computer-Aided Drafting. . . . . . . . . . . . . . . . . 3 EGD TEK 121 3-D Computer-Aided Design with SolidWorks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 LabVIEW Certification This skills certificate program in LabVIEW trains students to perform graphically based programming, meaning you can select various building blocks and connect them in a data flow pattern to draw code as opposed to using text- based languages. This certificate program also includes an object-oriented programming language course called C++ which is a powerful general-purpose programming language. SUBJECT & NO. COURSE UNITS ENG GEN 121* Programming for Engineers: C++. . . . . . . . . . . . . 4 ENG GEN 122* Programming and Problem-Solving in MATLAB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 EET 121* NI Certified LabVIEW Associate Developer.2 Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 *This course has a prerequisite. Land Surveying Technician Skills Certificate I This skills certificate program in land surveying trains stu- dents in the art and science of determining three-dimen- sional points, distances, and angles along, above, and below surfaces of the Earth. These points are then used to create maps and boundaries for ownership. Survey mea- surements are also a critical component during both the planning and construction phase of a design project. This certificate program can also be completed to assist stu- dents who are preparing for the state of California FE, FS, PE and PLS examinations. SUBJECT & NO. COURSE UNITS ENG SUP 100 Plane Surveying I: Boot Camp for High School Students. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 AND ENG SUP 101 Plane Surveying II: Boot Camp for High School Students. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Engineering and Technologies Department OR ENG SUP 121* Plane Surveying I. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ENG SUP 221* Plane Surveying II. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7 *This course has a prerequisite. Land Surveying Technician Skills Certificate II This skills certificate program in land surveying reviews over a hundred land surveying problems to assist students to pass the state of California, FS, FE, PE and PLS examina- tions. It also provides students hands-on land surveying activities in boundary. SUBJECT & NO. COURSE UNITS ENG SUP 121* Plane Surveying I. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ENG SUP 221* Plane Surveying II. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ENG SUP 224 Land Surveyors in Training Preparatory Course. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 ENG SUP 225 Boundary Control for Surveyors. . . . . . . . . . . . . . . 2 Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 *This course has a prerequisite. Land Surveying Technician for High School Students This skills certificate program in land surveying trains sec- ondary school students in the art and science of deter- mining three-dimensional points, distances, and angles along, above, and below the surface of the Earth. These points are then used to create maps and boundaries for ownership. Survey measurements are also a critical com- ponent during both the planning and construction phase of a design project. This skills certificate program is a gateway course for secondary school students who desire to become a land surveying technician or a professional land surveyor. SUBJECT & NO. COURSE UNITS ENG SUP 100 Plane Surveying I: Boot Camp for High School Students. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 ENG SUP 101* Plane Surveying II: Boot Camp for High School Students. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 OR ENG SUP 121* Plane Surveying I. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5 *This course has a prerequisite. Network + The Network+ Skills Certificate prepares students for the certification needed to become a certified Network tech- nician; installing, operating, managing, maintaining, and troubleshooting a home or corporate network. This tech- nology program offers quality technical training so stu- dents may achieve certifications that are "industry-rec- ognized." Students become proficient in the skills needed to configure and implement Windows servers; to config- ure networks, routers, and wireless routers as well as VPN (Virtual Private Networks) and network security vulnerabil- ity. This skills certificate also helps students prepare for the CompTIA Network+ Certification. SUBJECT & NO. COURSE UNITS ELECTRN 121** Cisco Essentials: Part 1 CompTIAs A+ Hardware Certification. . . . . . . . . . . . . . . . . . . . . . . 3 ELECTRN 122** Cisco Essentials: Part 2 CompTIAs A+ Software Certification. . . . . . . . . . . . . . . . . . . . . . . . 3 ELECTRN 125 CompTIA Network+ Certification Training. 3 ELECTRN 126** Installing, Configuring and Administering a Microsoft OS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 **This course has a corequisite. Programming Certification This skills certificate program provides a basic under- standing of robotics which is a branch of engineering that includes the usage and understanding of electronic com- ponents, computer science, and mechanical engineering. This certificate program also provides students an under- standing of how programmable circuit boards and soft- ware are used to write and upload computer code. SUBJECT & NO. COURSE UNITS MIT 220 Introduction to Robotics. . . . . . . . . . . . . . . . . . . . . . . . . 3 EET 123 Introduction to Arduino. . . . . . . . . . . . . . . . . . . . . . . . . . 2 Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Programming and Problem Solving This skills certificate program requires students to have advanced math knowledge to code in both MATLAB and C++. Programming is the process that profession- als use to write code to instruct many forms of applica- tions, software, and computers to perform a particular computation. SUBJECT & NO. COURSE UNITS EET 123 Introduction to Arduino. . . . . . . . . . . . . . . . . . . . . . . . . . 2 ENG GEN 121* Programming for Engineers: C++. . . . . . . . . . . . . 4 ENG GEN 122* Programming and Problem-Solving in MATLAB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 *This course has a prerequisite. Property Boundaries for Real Estate and Land Surveying This skills certificate program enhances a student's understanding in boundary surveys. This certificate pro- gram is hands-on and includes an introductory course in real estate. Course topics will include field work, types of legal descriptions, and an introduction to residential, commercial, and industrial real estate. SUBJECT & NO. COURSE UNITS REAL ES 005 Legal Aspects of Real Estate I. . . . . . . . . . . . . . . . . . 3 ENG SUP 121* Plane Surveying I. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ENG SUP 221* Plane Surveying II. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ENG SUP 225 Boundary Control for Surveyors. . . . . . . . . . . . . . . 2 Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 *This course has a prerequisite. Rocketry Level I Certification This skills certificate program teaches students to suc- cessfully build a level 1 solid-fuel rocket. It begins with basic definitions and elementary principles such as a total impulse, mass flow, specific impulse, the ideal rocket equation, thrust chamber design, nozzle theory, heat transfer, flight performance, propellant chemistry, and propulsion operation in space. A detailed investigation of rocket fundamentals is necessary to acquaint the student with 21st-century technology. At the end of this certificate program, students over 18 will be ready to launch their rocket and, if successful, receive a Level 1 certification from NAR (National Association of Rocketry). Engineering and Technologies Department SUBJECT & NO. COURSE UNITS EGD TEK 102 Engineering Graphics with CAD and Introduction to GD&T. . . . . . . . . . . . . . . . . . . . . . . . . . 3 EET 124 Introduction Level 1 Rocketry. . . . . . . . . . . . . . . . . . . 2 Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Sustaining Energy Certification This skills certificate program enhances a student's understanding in sustainable energy sources and how they are used for practical purposes. The program also involves hands-on laboratory exercises to learn how cir- cuit analysis basics are used to analyze engineering prob- lems for energy problems. SUBJECT & NO. COURSE UNITS EET 120 DC Circuits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 EET 122* Solar Cell and Hydrogen Fuel Cell Technologies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 *This course has a prerequisite. Certificates of Achievement Advanced Manufacturing Engineering Technician (Academic Plan E039795D) The Advanced Manufacturing Engineering Technician pro- gram is designed to train the students and the workforce in high growth and high demand technologies such as; Additive Manufacturing - 3D printing of Plastics and Met- als, use Laser Scanning to digitize parts and in Coordinate Measuring Machines, CNC programmer and Operator training in addition to Computer Aided Design (CAD) and Computer Aided Manufacturing (CAM). The program offers hands-on experience to become technicians who are able not only manufacture but analyze and design products, to communicate professionally both orally and in writing, to work on team-based projects. The program emphasizes apprenticeship and work-based learning. The Certificate of Achievement will be awarded upon successful comple- tion of required courses. Program Learning Outcomes: � Communicate effectively in written or graphical format. � Design parts by utilizing Computer Aided Drafting (CAD) software like SolidWorks. � Build parts by using Computer Aided Manufacturing (CAM) techniques specifically in Additive Manufac- turing and 3D printing. SUBJECT & NO. COURSE UNITS ENG TEK 101 Engineering Technology Application. . . . . . . . 2 EGD TEK 102 Engineering Graphics with CAD and Introduction to GD&T. . . . . . . . . . . . . . . . . . . . . . . . . . 3 ENG TEK 141 Mechanical Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 ENG TEK 125 CNC Setup and Operation. . . . . . . . . . . . . . . . . . . . . . 3 IND TEK 104 Print Reading with GD&T. . . . . . . . . . . . . . . . . . . . . . . . . 2 MIT 101 Machine Shop Training and Safety. . . . . . . . . . 2 EGD TEK 121 3-D Computer-Aided Design with SolidWorks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Computer-Aided Drafting (CAD) (Academic Plan E021173D) The Engineering and Technologies Department offers a CAD program leading to a Certificate of Achievement that may enhance employment or promotion within industry, which is pursuable on a part time or full time basis. This certificate program prepares the student for an entry- level employment in the field of Engineering Graphics Technology (CAD) within the industry. Specialization during the coursework is possible in such fields as civil, electrical, mechanical and structural engineering. Program Learning Outcomes: � Demonstrate defined mastery of the Architec- tural Computer Aided Drafting (CAD) Certificate of Achievement, which is dependent upon the perfor- mance in the specific program courses. SUBJECT & NO. COURSE UNITS EGD TEK 102 Engineering Graphics with CAD and Introduction to GD&T. . . . . . . . . . . . . . . . . . . . . . . . . . 3 EGD TEK 111 2-D Computer-Aided Drafting. . . . . . . . . . . . . . . . . 3 EGD TEK 121 3-D Computer-Aided Design with SolidWorks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 EGD TEK 221 CAD-Advanced Applications 3-D. . . . . . . . . . . . 2 IND TEK 103 Technical Writing and Communication. . . . 2 IND TEK 104 Print Reading with GD&T. . . . . . . . . . . . . . . . . . . . . . . . . 2 IND TEK 106 Shop Math and Measurements. . . . . . . . . . . . . . . 2 Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Geo-Spatial Engineering and Technologies (Academic Plan E038332D) The Geospatial Engineering and Technologies (GSET) Cer- tificate of Achievement is structured to produce quali- fied geospatial engineering technicians by offering rele- vant technical courses and business practices primarily in land surveying, but also in civil and geospatial engi- neering. Professionals and technicians can be employed in a variety of settings, including private businesses and government agencies. Upon completing the GSET Certif- icate of Achievement, students can pursue careers as a professional land surveyor or technician, a cartographer or a photogrammetrist, a civil engineering technician, or can continue to complete the Geospatial and Engineering Technologies Associate in Science degree. Program Learning Outcomes: � Apply math computations as they pertain to land surveying field applications for land development works. � Integrate the usage of boundary control measures to formally define the boundaries of a property. SUBJECT & NO. COURSE UNITS ENG SUP 121* Land Surveying I. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ENG SUP 221* Land Surveying II. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ENG SUP 224 Land Surveyor-in-Training Review Course.2 ENG SUP 225 Boundary Control for Surveyors. . . . . . . . . . . . . . . 2 ENG SUP 200 Business Practices for Land Surveyors & Civil Engineers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 ENG SUP 201* Geo-Spatial Technologies I. . . . . . . . . . . . . . . . . . . . . 2 ENG SUP 202* Geo-Spatial Technologies II. . . . . . . . . . . . . . . . . . . . 2 ENG GEN 185 Directed Study - General Engineering. . . . . . . 1 Engineering and Technologies Department MATH 241 Trigonometry with Vectors. . . . . . . . . . . . . . . . . . . . . . 4 OR MATH 241S Trigonometry with Vectors with Support. . . 4 Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 *This course has a prerequisite. IT Technician Pathway: Stage 1 Computer Retail Sales and Support (Academic Plan E038507D) The IT Technician Pathway: Stage I Computer Retail Sales and Support Certificate of Achievement is the first stage of the statewide IT Technician pathway and prepares stu- dents to develop their fundamental IT Technician Skills. While completing coursework in customer service, com- munication, Microsoft Office, and information systems coursework, along with earning the CompTIA A+ industry certification, students gain practical experience as they learn how to succeed in an IT retail environment. Upon completion of this program, students would be quali- fied for entry level IT positions such as Retail Salespersons, Customer Service Representatives, Retail Sales Workers, and Sales Representatives. Program Learning Outcomes: � Install and/or configure the software and hardware systems so that they function properly. � Integrate the foundational knowledge of business, specifically retail merchandizing, customer service, and communication, with computer and software systems. SUBJECT & NO. COURSE UNITS BUS 001 Introduction to Business. . . . . . . . . . . . . . . . . . . . . . . . . 3 CAOT 048 Customer Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 CAOT 032 Business Communications. . . . . . . . . . . . . . . . . . . . . 3 OR IND TEK 103 Technical Writing and Communication. . . . 2 CAOT 082 Microsoft Office Suite. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ELECTRN 121** Cisco Essentials: Part 1 CompTIAs A+ Hardware Certification. . . . . . . . . . . . . . . . . . . . . . . 3 ELECTRN 122** Cisco Essentials: Part 2 CompTIAs A+ Software Certification. . . . . . . . . . . . . . . . . . . . . . . . 3 ELECTRN 126** Installing, Configuring & Administering a Microsoft OS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 CAOT 035 Concepts in Information Systems. . . . . . . . . . . . 3 OR CIS 101 Introduction to Computers and Their Uses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-24 **This course has a corequisite. IT Technician Pathway: Stage 2 Help Desk User Support (Academic Plan E039881D) The Help Desk User Support Certificate of Achievement is the second stage of the statewide IT Technician pathway and prepares students to further develop their IT Tech- nician Skills. While completing the network and server security coursework, students gain practical experience as they learn how to use Help Desk software. As students' complete coursework, they are encouraged to complete the aligned industry valued certifications such as Comp- TIA Network+, CompTIA Security+, Microsoft Server, and Microsoft Desktop. Students who have completed Stage 1 of the IT Technician pathway along with this stage are prepared for positions such as Computer User Support Specialists, Computer Network Support Specialists, and IT retail supervisory positions. Program Learning Outcomes: � Create and articulate the appropriate operating system and secure network system required to suit organizational needs. � Install and/or reconfigure the software and hardware systems so that they function properly. � Integrate the foundational knowledge of business, specifically retail merchandizing, customer service, and communication, with computer and software systems. SUBJECT & NO. COURSE UNITS BUS 001 Introduction to Business. . . . . . . . . . . . . . . . . . . . . . . . . 3 CAOT 048 Customer Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 CAOT 032 Business Communications. . . . . . . . . . . . . . . . . . . . . 3 OR IND TEK 103 Technical Writing and Communication. . . . 2 CAOT 082 Microsoft Office Suite. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ELECTRN 121** Cisco Essentials: Part 1 CompTIAs A+ Hardware Certification. . . . . . . . . . . . . . . . . . . . . . . 3 ELECTRN 122** Cisco Essentials: Part 2 CompTIAs A+ Software Certification. . . . . . . . . . . . . . . . . . . . . . . . 3 CAOT 035 Concepts in Information Systems. . . . . . . . . . . . 3 OR CIS 101 Introduction to Computers and Their Uses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ELECTRN 125 CompTIA Network+ Certification Training. 3 ELECTRN 126** Installing, Configuring & Administering a Microsoft OS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ELECTRN 127 Microsoft Server Systems and Network Administration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ELECTRN 128 Network Security Fundamentals. . . . . . . . . . . . . . 3 Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-33 **This course has a corequisite. IT Technician Pathway: Stage 3 IT Technician (Academic Plan E039882D) The IT (Information Technology) Technician Certificate of Achievement is the third stage of the statewide IT Techni- cian pathway and equips students with the advanced IT skills required of an IT Technician. As students complete coursework, they are encouraged to complete the aligned industry-valued certifications such as CompTIA Linux+, Cisco Certified Entry Networking Technician (CCENT), and the Certified Ethical Hacker (CEH). Students who have completed Stage I and II of the IT Technician pathway along with this stage are prepared for positions such as Computer Systems Analysts, Information Security Ana- lysts, Network and Computer Systems Administrators, and IT wholesale/retail supervisory positions. Program Learning Outcomes: � Create and articulate the appropriate operating system and secure network system required to suit organizational needs. Engineering and Technologies Department � Integrate the foundational knowledge of business, specifically retail merchandizing, customer service, and communication, with computer and software systems. � Install and/or reconfigure the software and hardware systems so that they function properly. � Program automation tasks, including cybersecu- rity defenses, and configuring and troubleshooting networks. SUBJECT & NO. COURSE UNITS BUS 001 Introduction to Business. . . . . . . . . . . . . . . . . . . . . . . . . 3 CAOT 048 Customer Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 CAOT 032 Business Communications. . . . . . . . . . . . . . . . . . . . . 3 OR IND TEK 103 Technical Writing and Communication. . . . 2 CAOT 082 Microsoft Office Suite. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ELECTRN 121** Cisco Essentials: Part 1 CompTIAs A+ Hardware Certification. . . . . . . . . . . . . . . . . . . . . . . 3 ELECTRN 122** Cisco Essentials: Part 2 CompTIAs A+ Software Certification. . . . . . . . . . . . . . . . . . . . . . . . 3 CAOT 035 Concepts in Information Systems. . . . . . . . . . . . 3 OR CIS 101 Introduction to Computers and Their Uses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ELECTRN 125 CompTIA Network+ Certification Training. 3 ELECTRN 126** Installing, Configuring & Administering a Microsoft OS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ELECTRN 127 Microsoft Server Systems and Network Administration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ELECTRN 128 Network Security Fundamentals. . . . . . . . . . . . . . 3 ELECTRN 129* Python for Networking. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 ELECTRN 130 Routing & Switching Fundamentals. . . . . . . . . 4 ELECTRN 131 Installing, Configuring, and Administering Linux Operating System. . . . . . . . . . . . . . . . . . . . . . 2 ELECTRN 132 Certified Ethical Hacking. . . . . . . . . . . . . . . . . . . . . . . . 2 Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42-43 *This course has a prerequisite. **This course has a corequisite. Associate Degree Programs Engineering Graphics and Design Technology, Associate in Science Degree (Academic Plan E021174C) The Engineering & Technologies Department offers an Associate in Science Degree in Engineering Graphics & Design Technology. Upon completion of the Comput- er-Aided Drafting (CAD) Certificate of Achievement with at least 2.0 GPA, students should take 2 additional major courses ENG GEN 212 and MIT 201 as well as 20 more units of restricted electives as listed below. In addition to major courses, students should fulfill the general education graduation requirements to total 60 units. In addition to enhancement of employment or promotion within indus- try, this AS degree prepares students for 4-year programs. Program Learning Outcomes: � Apply 2-D and 3-D Computer Aided Drafting (CAD) techniques to construct and test project prototypes through technical reports/presentations while employing Geometric Dimensioning & Tolerancing (ASME Y14.5) industry standard. � Apply concepts and theories in Engineering Graphics and Design to describe or explain use in industry. � Develop conclusions for laboratory experiments that verify theory from classroom lectures. SUBJECT & NO. COURSE UNITS COMPLETE THE FOLLOWING COURSES 22 EGD TEK 102 Engineering Graphics with CAD and Introduction to GD&T. . . . . . . . . . . . . . . . . . . . . . . . . . 3 EGD TEK 111 2-D Computer-Aided Drafting. . . . . . . . . . . . . . . . . 3 EGD TEK 121 3-D Computer-Aided Design with SolidWorks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 EGD TEK 221 CAD-Advanced Applications 3-D. . . . . . . . . . . . 2 ENG GEN 212* Introduction to Engineering Design. . . . . . . . . . 3 IND TEK 103 Technical Writing and Communication. . . . 2 IND TEK 104 Print Reading with GD&T. . . . . . . . . . . . . . . . . . . . . . . . . 2 IND TEK 106 Shop Math and Measurements. . . . . . . . . . . . . . . 2 MIT 201 Manufacture and Processes. . . . . . . . . . . . . . . . . . . 3 RESTRICTED ELECTIVES: COMPLETE 17 UNITS FROM THE FOLLOWING: 17 EGD TEK 185 Directed Study - Engineering Graphics & Design Technology. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 EGD TEK 285 Directed Study - Engineering Graphics & Design Technology. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 EGD TEK 385 Directed Study - Engineering Graphics & Design Technology. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ENG GEN 101 Introduction to Science, Engineering and Technology. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ENG GEN 121* Programming for Engineers C++. . . . . . . . . . . . . 4 ENG GEN 122* Programming and Problem-Solving in Matlab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ENG GEN 131* Statics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ENG GEN 151* Materials of Engineering. . . . . . . . . . . . . . . . . . . . . . . . . 3 ENG GEN 220* Electrical Circuits I. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ENG GEN 221* Engineering Probability and Statistics. . . . . . 3 ENG GEN 225* Digital Circuit Analysis. . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ENG GEN 231* Dynamics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ENG GEN 241* Strength of Materials. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ENG GEN 242** Strength of Materials Laboratory. . . . . . . . . . . . . . 1 ENG GEN 272* Economic Analysis for Engineers. . . . . . . . . . . . . 3 MIT 220 Introduction to Robotics. . . . . . . . . . . . . . . . . . . . . . . . . 3 EET 120 DC Circuits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 EET 121* Ni Certified Labview Associate Developer (CLAD). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 EET 122* Solar Cell and Hydrogen Fuel Cell Technologies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 EET 123 Introduction to Arduino. . . . . . . . . . . . . . . . . . . . . . . . . . 2 EET 124 Introduction to Level I Rocketry. . . . . . . . . . . . . . . . 2 ENG SUP 121* Plane Surveying I. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ENG SUP 221* Plane Surveying II. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ENG SUP 224 Land Surveyor-In-Training Review Course.2 ENG SUP 225 Boundary Control for Surveyors. . . . . . . . . . . . . . . 2 ELECTRN 121** Cisco Essentials: Part 1 CompTIAs A+ Hardware Certification. . . . . . . . . . . . . . . . . . . . . . . 3 ELECTRN 122** Cisco Essentials: Part 2 CompTIAs A+ Software Certification. . . . . . . . . . . . . . . . . . . . . . . . 3 ELECTRN 125 CompTIA Network+ Certification Training. 3 ELECTRN 126** Installing, Configuring and Administering a Microsoft OS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 IND TEK 185 Directed Study - Industrial Technology. . . . . 1 IND TEK 285 Directed Study - Industrial Technology. . . . 2 Engineering and Technologies Department IND TEK 385 Directed Study - Industrial Technology. . . . 3 MIT 185 Directed Study - Manufacturing and Industrial Technology. . . . . . . . . . . . . . . . . . . . . . . . . . 1 MIT 285 Directed Study - Manufacturing and Industrial Technology. . . . . . . . . . . . . . . . . . . . . . . . . 2 MIT 385 Directed Study - Manufacturing and Industrial Technology. . . . . . . . . . . . . . . . . . . . . . . . . 3 LACCD GENERAL EDUCATION PLAN 27 Total . . . . . . . . . . . . . . . . . . . . . . 60 Note: Per AP 4100, this degree is considered a high unit major with major requirements that exceed 37 units. The following LACCD GE Area 4a (3 units) and Area 7 (3 units) are waived for this degree. *This course has a prerequisite. **This course has a corequisite. Engineering Technology: Advanced Manufacturing Associate in Science Degree (Academic Plan E040042C) The Engineering Technician: Advanced Manufacturing program is designed to train the students and the work- force in high-growth and high-demand technologies such as; Additive Manufacturing - 3D printing of Polymers and Metals, CNC programming with Mastercam and Operator training in addition to computer Aided Design (CAD) and Computer Aided Manufacturing (CAM). The program offers hands-on experience to become technicians who are able not only to manufacture but analyze and design products, to communicate professionally both orally and in writ- ing, and to work on team-based projects. The program emphasizes apprenticeship and work-based learning. Program Learning Outcomes: � Apply written, oral, and graphical communication in both technical and non-technical environments. � Set up and operate a CNC machine and program and set up a CNC with Mastercam. � Function effectively as a member of a technical team. � Build parts by using Computer Aided Manufacturing (CAM) techniques specifically in Additive Manufac- turing and 3D printing. � Apply the knowledge, techniques, skills, and modern tools of the discipline to narrowly defined technology activities. SUBJECT & NO. COURSE UNITS COMPLETE THE FOLLOWING COURSES 41 ENG GEN 212* Introduction to Engineering Design. . . . . . . . . . 3 EGD TEK 102 Engineering Graphics with CAD and Introduction to GD&T. . . . . . . . . . . . . . . . . . . . . . . . . . 3 ENG TEK 151 Basic Programming Logic Controls (PLC). . 2 MIT 101 Machine Shop Training and Safety. . . . . . . . . . 2 MATH 260 Precalculus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 OR MATH 260S Precaculus with Support. . . . . . . . . . . . . . . . . . . . . . . . 5 ENG TEK 141 Mechanical Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 IND TEK 104 Print Reading with GD&T. . . . . . . . . . . . . . . . . . . . . . . . . 2 MIT 201 Manufacture Processes. . . . . . . . . . . . . . . . . . . . . . . . . . 3 ENG TEK 101 Engineering Technology Application . . . . . . . 2 EGD TEK 121 3-D Computer-Aided Design with SolidWorks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 PHYSICS 011 Introductory Physics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ENG TEK 111 Additive Manufacturing. . . . . . . . . . . . . . . . . . . . . . . . . . 2 ENG TEK 125 CNC Setup and Operation. . . . . . . . . . . . . . . . . . . . . . 3 ENG TEK 142 Fluid Power Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ENG TEK 220 Introduction to Industrial Robots. . . . . . . . . . . . . 3 LACCD GENERAL EDUCATION PLAN 27 Total . . . . . . . . . . . . . . . . . . . . . . 60 Note: 6 units of major courses may be double-counted in LACCD General Education Areas 2 and 5. *This course has a prerequisite. Geo-Spatial Engineering and Technologies, Associate in Science Degree (Academic Plan E038337C) The Geospatial Engineering and Technologies (GSET) Associate in Science Degree program at ELAC is structured to produce qualified geospatial engineering technicians by offering relevant technical courses and business prac- tices primarily in land surveying, but also in civil and geo- spatial engineering. Students use state-of-the-art equip- ment to perform practical and advanced forms of design and analysis for land surveying and civil engineering land development projects. Professionals and technicians can be employed in a variety of settings, including private businesses and government agencies. Upon completing the Associate in Science Degree in Geospatial Engineering and Technologies (GSET) students can pursue careers as a professional land surveyor or technician, a cartographer or a photogrammetrist, or a civil engineering technician. In addition, GSET provides a preparatory course for the National Council of Examiners for Engineering and Survey- ing (NCEES), Fundamentals of Surveying (FS) exam, which if passed successfully, leads to an increase in the likeli- hood of job placement with public, private and non-profit organizations. Program Learning Outcomes: � Perform test taking strategies for both the State of California Fundamentals of Surveyors (FS) and the Professional Land Surveyors (PLS) examination. � Perform the fundamental elements of land surveying field and office work. � Utilize advanced software for land development applications. SUBJECT & NO. COURSE UNITS MAJOR CORE REQUIREMENTS 23 ENG SUP 121* Land Surveying I. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ENG SUP 221* Land Surveying II. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ENG SUP 224 Land Surveyor-in-Training Review Course.2 ENG SUP 225 Boundary Control for Surveyors. . . . . . . . . . . . . . . 2 ENG SUP 200 Business Practices for Land Surveyors & Civil Engineers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 ENG SUP 201* Geo-Spatial Technologies I. . . . . . . . . . . . . . . . . . . . . 2 ENG SUP 202* Geo-Spatial Technologies II. . . . . . . . . . . . . . . . . . . . 2 ENG GEN 185 Directed Study � General Engineering. . . . . . . 1 ENG GEN 212* Introduction to Engineering Design. . . . . . . . . . 3 MATH 241 Trigonometry with Vectors. . . . . . . . . . . . . . . . . . . . . . 4 OR MATH 241S Trigonometry with Vectors with Support. . . 4 Engineering and Technologies Department RESTRICTED ELECTIVES 8-10 COMPLETE 6 UNITS FROM THE FOLLOWING: EGD TEK 102 Engineering Graphics with CAD and Introduction to GD&T. . . . . . . . . . . . . . . . . . . . . . . . . . 3 EGD TEK 121 3-D Computer-Aided Design with SolidWorks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 CHEM 065 Introductory General Chemistry. . . . . . . . . . . . . . 4 PHYSICS 011 Introductory Physics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 COMPLETE 2-4 UNITS FROM THE FOLLOWING: GEOG 025 Introduction to Geographic Information Systems and Laboratory. . . . . . . . . . . . . . . . . . . . . 4 OR GIS 025 Introduction to Geographic Information Systems and Laboratory. . . . . . . . . . . . . . . . . . . . . 4 ARC 164 Design Software for Architecture. . . . . . . . . . . . . 2 ENG GEN 101 Introduction to Science, Engineering and Technology. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 COMPLETE ADDITIONAL DEGREE-APPLICABLE UNITS, IF NEEDED, TO REACH 60 UNITS. LACCD GENERAL EDUCATION PLAN 27 Total . . . . . . . . . . . . . . . . . . . . . . 60 Note: 3 units of major courses may be double counted in LACCD General Education Area 2. *This course has a prerequisite. IT Technician Pathway, Associate in Science Degree (Academic Plan E039823C) The IT (Information Technology) Technician AS Degree is the final stage of the statewide IT Technician pathway and equips students with the advanced IT skills required of an IT Technician. As students complete coursework, they are encouraged to complete the aligned industry valued cer- tifications such as CompTIA Linux+, Cisco Certified Entry Networking Technician (CCENT), and the Certified Ethical Hacker (CEH). Students who have completed Stage I and II of the IT Technician pathway along with this stage are pre- pared for positions such as Computer Systems Analysts, Information Security Analysts, Network and Computer Sys- tems Administrators, and IT wholesale/retail supervisory positions. Program Learning Outcomes: � Integrate the foundational knowledge of business, specifically retail merchandizing, customer service, and communication, with computer and software systems. � Create and articulate the appropriate operating system and secure network system required to suit organizational needs. � Install and/or reconfigure the software and hardware systems so that they function properly. � Program automation tasks, including cybersecu- rity defenses, and configuring and troubleshooting networks. SUBJECT & NO. COURSE UNITS COMPLETE THE FOLLOWING COURSES 42-43 BUS 001 Introduction to Business. . . . . . . . . . . . . . . . . . . . . . . . . 3 CAOT 048 Customer Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 CAOT 032 Business Communications. . . . . . . . . . . . . . . . . . . . . 3 OR IND TEK 103 Technical Writing and Communication. . . . 2 CAOT 082 Microsoft Office Suite. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ELECTRN 121** Cisco Essentials: Part 1 CompTIAs A+ Hardware Certification. . . . . . . . . . . . . . . . . . . . . . . 3 ELECTRN 122** Cisco Essentials: Part 2 CompTIAs A+ Software Certification. . . . . . . . . . . . . . . . . . . . . . . . 3 CAOT 035 Concepts in Information Systems. . . . . . . . . . . . 3 OR CIS 101 Introduction to Computers and Their Uses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ELECTRN 125 CompTIA Network+ Certification Training. 3 ELECTRN 126** Installing, Configuring & Administering a Microsoft OS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ELECTRN 127 Microsoft Server Systems and Network Administration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ELECTRN 128 Network Security Fundamentals. . . . . . . . . . . . . . 3 ELECTRN 129* Python for Networking. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 ELECTRN 130 Routing & Switching Fundamentals. . . . . . . . . 4 ELECTRN 131 Installing, Configuring, and Administering Linux Operating System. . . . . . . . . . . . . . . . . . . . . . 2 ELECTRN 132 Certified Ethical Hacking. . . . . . . . . . . . . . . . . . . . . . . . 2 LACCD GENERAL EDUCATION PLAN 27 Total . . . . . . . . . . . . . . . . . . . . 60-61 Note: 3 units of major courses may be double counted in LACCD General Education area 4b. *This course has a prerequisite. **This course has an corequisite. Note: Per AP 4100, this degree is considered a high unit major with major requirements that exceed 37 units. The following LACCD GE Area 4a (3 units) and Area 7 (3 units) are waived for this degree. Transfer Curriculum Information regarding lower division major preparation requirements required to transfer to a University of Cal- ifornia (UC) or California State University (CSU) campus may be obtained at www.assist.org. For information about independent or out-of-state colleges/universities, please consult with a counselor. Subjects & Course Descriptions